Proudly present to you the Desert Crawler in our Collectors Scale!!!
With still an impressive length of 65cm for the Crawler, we bringing you this iconic vehicle on two different bases.
The Universal Museum classic base and also a Tatooine Diorama base.
The Crawlers are identical on both versions – only the base is the differentiator.
This model is digitally created by Alain Rivard, using a ton of references and donor parts and physically created by the MYC Team.
-
High-quality solid Poly Resin Material (Polystone, PU, ABS, Rubber and Steel)
-
DIMENSIONS:
-
Crawler: 25 1/4″ L x 8 1/2″ W x 12″ H
-
Tatooine Base: 27 1/4″ L x 18.5″ W x 1.5″ x 17.5″ H
-
Classic Base: 20.5″ L x 11 3/4: W x 1.5″ high
-
LED light-up features
-
Rubber Tracks
-
Removable Track covers
-
Hand-painted with quality paint
-
Aluminum Name Plaque with stand
-
Magnet supports
-
Crawler digitally created by Alain Rivard
-
Bases digitally created by Michael Meissnest
-
ES TBD
-
Shipping Estimated in September 2024 from China
Proudly present to you the Model-X Wing Rebel Fighter in 1/24 Scale.
We created Red 3 and Red 5.
These fighters differentiate themselves not just by the paint scheme, but also by several details on the wings and body.
The Red 3 was given a more ILM look and the ILM cockpit, while the Red 5 was created more with a film cockpit.
This model is digitally created by Dominik Schwarz and the SCFI-STUDIO-SCALE-MODELERS Team and physically created by the MYC Team.
- High-quality solid Poly Resin Material (Polystone, PU & ABS & Steel)
- 18.25″ wide x 22.25″ deep x 11″ high with base
- 20lbs
- Adjustable pose through swivel joint nut
- Light-up Cockpit & thrusters
- Red 3 (R2-F2 and Biggs Pilot switch out included – not shown)
- Red 5 R2-D2 will have silver dome
- Hand-painted with quality paint
- Aluminum Name Plaque with stand
- Magnet supports
ES: Bundle = 50, Red 5 = 170, Red 3 = 50
One of the most iconic sci-fi space ships from the well known show BATTLE STAR GALACTICA, Fan Art Models is presenting you our take on the Viper. Digitally created by Alain Rivard, FMA created the physical model.
High-quality resin and PU materials are used for this model. Simple magnetized parts makes this model ready to display in a few minutes.
The model measures 15.5″x8″x7″ and is standing on a heavy polystone base with acrylic sheet. The Base measures 17.5″x9.5″ and the total weight is 16lbs.
-
Solid Polystone and PU Materials
-
Heavy solid Polystone Base with beveled Acrylic sheet
-
Base and ship measure: 17.5″x9.5″x10.5″
-
Ship only measure: 15.5″x8″x7″
-
Landing Gear switch outs / Covers to pose flying or landing
-
Heavy duty swivel joint
-
Hand painted with high quality paint
Features:
Burly, pig-like brutes who favored axes and other primitive weapons, Gamorreans were often used as muscle by Hutts and other underworld kingpins. Jabba the Hutt employed a gang of intimidating Gamorreans to guard his palace on Tatooine.
- High-Quality solid Poly Resin Material (Polystone)
- 15.5″w x 13.5″d x 22″h (22.5″ with column switch out)
- 34lbs (heaviest set up)
- 9 switch out parts
- Hand Painted with quality paint
- professionally tailored fabric
- Magnet supports
- Co-Op sculpture with Aspan Lohan
Proudly present to you the Model-Int Imperial Fighter in 1/24 Scale. We have 2 versions painted. The clean version is similar to the old screened used models and the weathered more appearance feel.
This model is digitally created by Izan Ramos and the SCFI-STUDIO-SCALE-MODELERS Team
- High-quality solid Poly Resin Material (Polystone, PU & ABS)
- 14.5″ wide x 20″ deep x 21″ high with base (long rod) 19″ with base (short rod)
- 20lbs
- 2 rods ( one long to match the cockpit height of TIE Fighters)
- Hand-painted with quality paint
- Magnet supports
- OPTIONS: COCKPIT LED, COCKPIT GLASS, WEATHERED/CLEAN, 181st STRIPE
An elegant example that stands apart from typical brutish Imperial engineering, the Lambda-class shuttle is a multi-purpose transport used in the Imperial starfleet. The Empire pressed the shuttle into service for both cargo ferrying and passenger duty.
This model is digitally created by Izan Ramos and the SCFI-STUDIO-SCALE-MODELERS Team and physically created by the MYC Team in 3/4 Studio Scale.
- High-Quality Poly Resin Material (Polystone) and PU Materials
- Chromed Screw caps
- Clear Acrylic base sheet
- Land Mode Version: 13″ wide x 19″ deep x 18.5″ high with base
- Flight Mode Version: 21″ wide x 19″ deep x 29.5″ high with Base
- Hand-Painted with high-quality paint
- Micro LEDs cast into each wing with flashing animation (will be white color)
- 2 bottom leds
- Landing Version with light-up ramp
- Custom Metal Plaque with Acrylic Stand
In cooperation with www.scifi-studio-scale.com, we present you a very unique model seen not just in ESB but also in the newer Obiwan Series – Imperial Probe Dispatch Pods!
Many original donor kits from back in the days were used to re-create digitally as accurately as possible by Robert Cowley to what we saw on screen… physically brought to life and painted by the MYC Team.
We also like to simulate the old ILM tags that have been used to archive them.
-
12.5″ L x 8.5″ W x 11″ H (with Base)
-
BIG POD: 9″x4″x4″
-
SMALL POD: 6.5″x4.5″x4.5″
-
12lbs
-
High-quality Acrylic covered base
-
Custom Metal Plaque with Acrylic Stand
-
easily magnetized assembly
-
Fully professional hand painted
“Is that a Naboo starfighter?”
“That’s what it started off as.”
Cobb Vanth, and Din Djarin on the fighter
A modified N-1 starfighter was owned by Din Djarin following the destruction of the Razor Crest. Djarin and the mechanic Peli Motto worked together to build the N-1 starfighter as a replacement.
In cooperation with Alain Rivard Studios, we present you the Mandalorians’ current transport. Digitally created by Alain Rivard and physically brought to life and painted by the MYC Team.
-
High-Quality Polyresin (polystone) PU and Metal parts.
-
18.5″ l x 11″ w x 7″ h(with Base)
-
9lbs
-
High-quality Acrylic covered base
-
All-direction swivel joint for posing
-
Switch out R5-D4
-
Mando and Grogu will be added during production.
-
Custom Metal Plaque with Acrylic Stand
-
easily magnetized assembly
GOLD LEADER come in!
In cooperation with www.scifi-studio-scale.com, we bring you a very well-known representation of the Model-Y.
Many original donor kits from back in the days were used to re-create digitally by Robert Cowley to what we saw on screen… physically brought to life and painted by the MYC Team.
-
28.5″ L x 14.5″ W x 8.5″ H
-
20lbs
-
LED light-up thrusters
-
High-quality Acrylic covered base
-
Custom Metal Plaque with Acrylic Stand
-
easily magnetized assembly
-
Fully professional hand painted
The Bantha-II cargo skiff was a common repulsor-based transport outside the Republic (and later the Empire.) They were extremely durable making them an austere choice for desert climes and perfect transports for passengers, cargo, or slaves for the Hutt Crime Syndicate or the slave traders of Zygerria.
-
High-Quality Poly Resin Material (Polystone) and PU Materials
-
Chromed Screw caps
-
Clear Acrylic base sheet
-
20.5″ wide x 8″ deep x 12″ high with base
-
12lbs
-
Hand-Painted with quality paint
The Viper probe droid, commonly referred to as the Imperial probe droid, was a model of probe droid manufactured by Arakyd Industries that was used by the Galactic Empire and, later, the New Republic, for deep space exploration and reconnaissance.
During the Galactic Civil War, Death Squadron launched Project Swarm, an operation that deployed 100,000 Viper droids across the galaxy in hyperdrive pods, in order to find the Rebellion’s base. A probe deployed to the planet Hoth eventually found the base, which set into action the evacuation and battle that took place soon after. The droids communicated using Omnisignal Unicode.
This is OUR VERSION of this nostalgic Star Wars Droid as a Fan Art Custom Statue
-
High-Quality solid Poly Resin Material (Polystone) and PU
-
12.5″ x 12.5″ x 25″high (with antennas and base)
-
20lbs !!
-
Optional Snow base included
-
Hand-Painted with quality paint
-
Magnet supports
-
Sculpted by Dave Moag from DROID DIVISION
The Class-6 escape pod was a standard emergency craft created by Corellian Engineering Corporation and used on many of their designs, such as the CR90 corvette.
Very accurate model of the used model seen in Another Hope.
-
High-Quality Poly Resin Material (Polystone) and PU Materials
-
Solid chromed iron rod
-
Chromed Screw caps
-
Clear Acrylic base sheet
-
12″ wide x 10″ deep x 12″ high with base
-
6lbs
-
Hand-Painted with quality paint
-
Sculpted by Robert Cowley
-
In cooperation with Scifi Studio Scale Modeller Team and the MYC Team
